Company Data Sheets

Company

Rajant Data Sheets

 

BreadCrumb® LX4
The Rajant BreadCrumb® LX4 delivers up to 4 radios in a single unit for maximum resiliency and flexibility. With options for 900 MHz, 2.4 GHz, 4.9 GHz and 5 GHz, the LX4 is the most advanced multi-radio node in the BreadCrumb family. more »
BC|Commander
With Rajant’s BC|Commander management software, administrators can monitor the status of their BreadCrumb wireless network, configure BreadCrumbs and graphically view the network topology. more »
VHDC-24V-50W and VHDC-24V-50W-LC
The Rajant VHDC-24V-50W and VHDC-24V-50W-LC are passive Power over Ethernet (PoE) compatible DC/DC converters designed for high reliability military and industrial applications. The VHDC-24-50W model offers a dust-tight, waterproof enclosure making it ideal for outdoor installations. The VHDC-24V-50W-LC model is the low-cost, non-sealed version of the device aimed at indoor installations. more »
BreadCrumb® ME4

The BreadCrumb ME4 is a rugged, wireless transceiver that supports IEEE 802-11a/b/g/n protocols to enable data, voice, and video applications. The device includes a faster processor than the ME3, and offers two radio modules and up to four antenna ports. A built-in battery is not included with the ME4. This device has not yet been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.

more »
BreadCrumb® LX3
The Rajant BreadCrumb® LX3 offers a wide variety of radio options for challenging deployments, with three radios in a single unit. The LX3 includes omni-directional antennas, pole mounting bracket and a power supply for a total solution. more »
BreadCrumb® LX
The Rajant BreadCrumb® LX family offers a wide variety of radio options for challenging deployments, with two radios in a single unit. The LX includes omni-directional antennas, pole mounting bracket and a power supply for a total solution. more »
BreadCrumb® ME3
The Rajant BreadCrumb® ME3 offers portable relay capabilities, allowing for automatic frequency switching for the most efficient route possible. The ME3 can be equipped with either 2.4 GHz or 900 MHz radios. Its rugged case allows it to be used in a variety of applications where durability and security are paramount. more »
BreadCrumb® ME2
The Rajant BreadCrumb® ME2 is a rugged wireless transmitter-receiver that supports an open-standard IEEE 802.11 b/g radio with up to two antennas to enable data, voice and video applications, and requires only a single switch to operate. more »
BreadCrumb® JR
The Rajant BreadCrumb® JR is Rajant’s smallest, most portable wireless receiver/transmitter at 7.125” x 1.48” x 1.30”. It features either a 2.4 GHz or 5.0 GHz radio making it an ideal choice for client nodes in the mesh network. The BreadCrumb JR is still pending final approval by the FCC at this time more »
BCAPI
BCAPI is a low-level Application Programming Interface (API) for managing the configuration and reading the state of any Rajant BreadCrumb device running firmware version 10.0 or higher. more »